Air rifle EDgun Matador R3M 6.35 mm (extended bullpup)

Technical characteristics of EDgun Matador R3M

One of the main advantages of the legendary “Matador” is its technical characteristics. The rifle is designed for airsoft and sports competitions, so the muzzle energy does not exceed 3 J (as standard). However, low power does not prevent a ballistic projectile from developing high speed. More details about all the nuances can be found in the performance characteristics table:

In addition to the high bullet speed, the presence of a Picatinny sighting rail, designed for installation of optical, collimator, diopter and other sights (NVD, thermal imager), is also striking. You can also install an additional “body kit” under the rifle barrel, the mounting width of which is 22 millimeters. As for the standard sighting device, it is a classic sports front sight and rear sight with two drums for position adjustment.

The weight of the weapon is also not too heavy (especially considering that the overall length of the rifle is 900 millimeters). Thanks to this, a person can use the Matador with almost any configuration (including teenagers). However, many may think that low weight will have an adverse effect on the recoil of the rifle - this is a deep misconception. Thanks to the ergonomic pistol grip and extended bullpup stock, the weapon completely absorbs inertial force during a shot.

Description of the air rifle EDgan Matador R3M extended bullpup 6.35 mm

EDgun is a company that has recently entered the global market for the production of pneumatics.
What is especially pleasant is that the company is localized in Russia in the city of St. Petersburg and now it is gradually becoming a global brand. EDgun pneumatics have gained quite a lot of fans in our country. This is not surprising, since the products of this company undergo multi-stage testing and standardization at a level corresponding to European leaders in the production of pneumatic weapons and accessories. The air rifle EDgun Matador extended bullpup 6.35 mm is a high-tech model of an air rifle. Rifles like this one tend to set the bar pretty high for other products of their type. Particular attention should be paid to its main characteristics.

Let's start with the fact that this weapon in its class belongs to pre-pumped rifles. PCP rifles are based on the principle of pre-pumping compressed air into a receiver, from which the air transfers energy to the bullet flying out of the barrel. The volume of such a duralumin receiver for this model of the Matador rifle is 388 cm³ .

The rifle fires lead bullets with a caliber of 6.35 mm. It is especially important that the bullet speed is designed for 315 m/s, but in order to comply with Russian legislation, the model is supplied with reduced power. This is a very high figure for rifles of this kind. The barrel of this weapon is rifled. Shooting can be done with single shots. The magazine holds 10 bullets . The store itself is designed according to the drum type. Many shooters may be pleased by the fact that the shots from the rifle are quite quiet.

What plays a role here is that this is a PCP rifle by design, and the sound is damped by a sound moderator. Due to this feature, the EDgun Matador extended bullpup 6.35 mm air rifle is perfect for hunters. In addition to hunting, this rifle can be used for sports training and recreational shooting.

All products leave the factory weakened to 3 J, so you can buy a rifle without a license.

Although the rifle comes without sights, you can always install an optical sight on it. This is achieved by having a Picatinny rail (22 mm).

The rifle's power is 3 J. The bullpup design gives the rifle an ergonomic design that matches the best examples of firearms.

As you can see from the description, the characteristics of this rifle are excellent. At the same time, the price of the EDgun Matador extended bullpup 6.35 mm air rifle is quite acceptable, say, for a real connoisseur of hunting. You can easily buy an air rifle EDgan Matador R3M extended bullpup 6.35 mm on our website with delivery to your home.

Attention! This model is supplied in permitted capacity for free purchase on the territory of the Russian Federation. At the same time, the model has the ability to increase power by replacing some parts or adjusting the design, but do not forget about the Federal Law “On Weapons” No. 150 - FZ. If necessary, relying on this law and being guided by it, you may need to obtain permission from the LLR of the Main Directorate of the Ministry of Internal Affairs of Russia after intervention in the structure.

Design

In addition to its outstanding technical characteristics, the Matador R3M air rifle is also famous for its modern design. Here are just a few features that the manufacturer recommends paying close attention to before purchasing:

1. Impact spring mechanism with increased power. It is thanks to this that the initial velocity of the bullet fluctuates around 300 m/s, and the power does not exceed 3 J. The system consists of a gas cylinder with the possibility of pre-pumping, as well as a compressed spring.
2. Improved sound moderator. Thanks to this system, shots become almost silent. The mechanism is located at the end of the barrel and can be removed if the owner wishes.
3. Anodized metal parts. The rifle is completely protected from corrosion, can be used in almost any weather conditions, and is also not afraid of mechanical damage.
4. Sturdy beech bed. Wooden parts are not only made of high-quality material, but also covered with a special transparent protective paint, which prevents the process of fading and abrasion of the wood.

And these are just the main design features announced by the manufacturer himself. It is thanks to them, as well as its excellent technical characteristics, that the rifle has gained popularity among professionals.

The main pros and cons of the rifle

Despite the fact that it is customary to talk about the Matador only in a positive way, if desired, an experienced gunsmith can still find several shortcomings. Of course, many of them are covered by the positive qualities of the model, and some are completely invisible. However, before purchasing, it is still recommended that you read the information from the following block in order to know what you may encounter during operation:

However, it should be noted that most of the shortcomings of the Matador can be combated with the help of an upgrade. But buying a “body kit” at exorbitant prices may seem like an unaffordable luxury for owners who have already paid 20 thousand rubles for a rifle. Therefore, it is worth considering the possibility of purchasing official upgrades, of which, fortunately, there are a huge number.

Modifications

Another undeniable advantage of the Matador from the EDgun company is the presence of several official modifications that allow you to select a rifle to suit your individual requirements. Here are a few models that are most popular:

1. EDgun “Matador” R3M extended bullpup. The weapon is more suitable than others for sniper shooting from a prone position, so it is often used by biathletes. It has the lowest recoil rate and maximum accuracy at long distances.
2. EDgun "Matador" R3M shortened bullpup. A model with a short stock, designed specifically for military tactical games. It has much less weight, thanks to which the shooter can aim faster and fire a shot at medium distance.
3. EDgun “Matador” R3M shortened Soft-touch. The most compact of all modifications. With dimensions of only 680 millimeters (barrel length - 420 mm), the baby has truly enviable killing power at short distances.

And these are only those modifications that affect the dimensions of the rifle. Of course, if you wish, you can purchase a weapon with optics or diopters. However, this aspect depends more on the configuration than on the modification.

What is included

The EDgun company decided to pleasantly surprise its potential customers with the availability of several configurations for the Matador rifle. Thanks to this, everyone can choose the set that best suits their personal preferences:

1. Set “Standard” (60 thousand rubles). The most modest of all packages, which includes a Matador R3M air rifle, a basic repair kit, an instruction manual, a pump for pumping air into a gas cylinder, a passport with technical characteristics, and a warranty card for 4 years or 4000 shots. The set is most suitable for people who do not plan to use the rifle often (for example, collectors), and also do not want to overpay for an unnecessary product.
2. Set “Master” (75 thousand rubles). An expanded version of the standard package, which includes a weapon with all the necessary documents, an extended repair kit (allows for complete disassembly of the weapon) and a small amount of consumables: 50 black shooting range targets, a box of 1000 rounds of ammunition, a spare oxygen cylinder. The weapon itself is not supplied in a box, but in a special metal case. The equipment is ideal for athletes and airsoft fans.
3. Set “Profi” (90 thousand rubles). This set is nothing more than an expanded version of the “Master” set, but with some changes. Firstly, instead of an additional gas cylinder, there is a reinforced one, increasing the power of the muzzle energy to 60 J. Secondly, a 4x optical sight is immediately installed on the rifle. And thirdly, the base magazine has been expanded to 20 rounds, which makes it almost impossible to worry about running out of ammunition. The set is suitable for hunting lovers.

Of course, each store reserves the right to supplement or change existing sets. You should be extremely careful when buying such packages, since they often offer the purchase of stale, partly unnecessary goods.

Rifle Matador R3M

As in the previous version, in this model the Matador RSR rifle is presented in three variations - shortened, standard and extended.
Technical characteristics (short, standard, long):

• Weight (without optics and cartridges, kg): 2.5/2.7/3.1;
• Length (mm): 680/745/890;
• Height (mm): 190;
• Width (mm): 50;
• Volume (cm cube): 236/280/360;
• Barrel length (mm): 420/470/590;
• Caliber (mm): 4.5/5.5/6.35;
• Number of shots (minimum): 40/50/70;
• Stock: wood (walnut, beech), laminate;
• Optics: “weaver” type base.

If we compare the old and new models objectively, the changes were not in vain. A complete reorganization of the “internals” has benefited the rifle: instead of the previous design on clamps, assembly is now carried out differently. The barrel is twisted, from the breech it passes through the clamp itself and the muffler (rear part). The muffler is placed at the front, after which the barrel is tensioned.

To compare this model, you can read the material about the Ataman 5.5 bullpup air rifle.

PSR rifles are especially popular; read about them here.

Read about pneumatics for hunting without a license at: https://pwpn.ru/p-oruzhie/vintovki/obzory/dlya-oxoty-bez-licenzii.html

The lower part of the clamp, passing through the lower tire, is attached to the reservoir (plug), which makes the structure integral. The tank itself, also modified by the way, is now hidden inside. Thus, it is now in no way connected with the point of impact and external factors - this significantly affects the quality of shooting.

Matador R3M

In itself, the weapon was created for hunting. The difficulty is that, due to the imperfection of legislation regarding hunting with air guns, this is partly not entirely legal. However, on the Internet you can find videos where there are edgan matador rifles, videos, hunting with which still remains the main function of these same rifles. Read about which pneumatics to buy for hunting here. It is worth remembering that the choice of air rifle determines whether the hunt will be successful or whether it is a waste of time and money. Hunting with a Hatsan air rifle is also very popular. Check out the technical specifications of Hatsan 125.

A 5.5 caliber straight-through rifle - that is, the standard version of the R3M, in a new modification, is suitable for both right-handers and left-handers . A bug with inconvenience regarding using the sight has been fixed: if in the previous version you had to reach out and adjust to the sight, here everything is much more convenient and ergonomic. The same caliber is used in Ataman air rifles.

In any case, when it comes to choosing a specific version of the model, you need to understand that the shortened version cannot be compared with the elongated version in terms of power, however, compactness is also a significant advantage. Only you choose what is most important to you: the power of the weapon, its size, or something else.

The factory-assembled R3M kit includes a case, a fitting for refilling, two drums, a certificate and passport, spare parts , as well as souvenirs from the company.

The sight can be purchased separately. By the way, EDgan also produces optical sights with tenfold magnification and weighing about 600 grams. In general, these sights have very good characteristics and, of course, are suitable for the rifles of the same company.

Possibilities for increasing power

As mentioned earlier, the easiest way to increase the power of an air rifle with a gas cylinder is to replace the air tank with a more advanced analogue. However, if the owner does not have the opportunity to purchase an expensive part, you can always rely on other methods:

1. Installation of muzzle gaskets. During a shot, a significant part of the air is vented and exits through numerous slots located in the body of the weapon. The easiest way to prevent this scenario is to install a few extra rubber gaskets.
2. Trimming the trunk. This method may seem radical to some, but it is the second most popular (after replacing the air tank). However, it is important to understand that trimming the trunk will lead to a decrease in accuracy at long distances.
3. Using quality oil. Most often, rifle models offered for sale in stores do not even undergo the re-preservation procedure. A high-quality oily composition (preferably mineral) will reduce the friction force of the bullet in the barrel and increase its speed.

Which method to choose is up to you. Each method is good in its own way. However, professionals, of course, recommend that you first think about replacing the energy source, since it is the force of the striking mechanism that is responsible for the power of the shot.

Disassembling the Edgan Matador R3M air rifle

Despite the fact that the Matador is considered to be a rifle for professionals, even a beginner can handle its partial disassembly. The most important thing is to strictly follow the algorithm of actions, which is usually described in the instructions, and also carefully handle the details:

1. We take out the store.
2. We pull back the shutter and remove the bullet.
3. We remove the weapon from the safety.
4. We fire a blank shot.
5. Unscrew the two bolts on the body.
6. Remove the rifle stock.
7. We bleed the air in the tank.
8. Unscrew the gas cylinder.
9. Remove the return mechanism.
10. We unscrew the trigger.

Maintenance is best done using the tools that come with the repair kit. Once lubrication and cleaning is complete, reassemble the rifle in reverse order. If you need to completely disassemble a certain system, then it is best to carefully check the instructions so as not to break anything.

Timeless classic - review of air guns

Due to the fact that the Matador model range is not particularly large, there is no need to encode names with many characters. The air vents differ in only three submodels: standard, shortened and extended. Therefore, it turns out that a review of one type of rifle includes as many as three.

Technical characteristics of the air in mm

Technical characteristics (short, standard, long):

• Weight (without cartridges and sight, kg): 2.5/2.7/3.1;
• Length (mm): 680/845/890;
• Height (mm): 190;
• Width (mm): 50;
• Volume (cm cube): 247/289/388;
• Barrel length (mm): 420/470/590;
• Caliber (mm): 4.5/5.5/6.35;
• Shots (minimum): 50/70/90;
• Stock: wood (beech, walnut), laminate;
• Sight: “weaver” setting.

The so-called “timeless classic”. Rifles of this model are the company’s calling card. Created over a decade ago, the first pcp air rifle was, to put it mildly, imperfect. However, during the process of modifications, most of the shortcomings disappeared, and the weapon became quite decent.

The device of this model is based on two figure-of-eight clamps, where the upper part is the barrel itself, and the lower part is the reservoir capacity. Assembling such a structure is not a particularly big problem, but shooting from it has a number of both advantages and disadvantages. Let's take a closer look.

EDgun matador

Pros:

1. The weapon is suitable for those who care about the number of shots. The matador will provide them in abundance.
2. Size – even the longest model looks very compact, it is not heavy and fits in the hand.
3. Recoil—or rather, the lack thereof. Due to the bullpup design, there is virtually no recoil, and the rifle's kick-up is minimal.

Minuses:

1. Poor shooting accuracy. A rifle for those who go for quantity rather than quality.
2. Dependence on weather conditions - the compressed air in the tank is dependent on weather changes, this can ruin all your plans.

However, almost any bullpup model is suitable for the above-mentioned characteristics, and not just the EDgan Matador rifle, the price of which is about 60,000 rubles with very minor deviations.

Video about an extended model with bullpup technology

Additional information is available in the video:

This model is often used as a hunting pneumatic. Here's a good example:

Analogues and prices

It’s hard to believe, but there is a real struggle among arms factories producing professional pneumatics - everyone is trying to offer something better than their competitor. Likewise, “Matador” has several analogues belonging to the price range from 70 to 100 thousand rubles:

Characteristics of the air rifle EDgun Matador R3M extended bullpup 6.35 mm

Air rifle EDgun Matador R3M 6.35 mm (extended bullpup) buy in the Popadiv10 online store. Air rifle EDgun Matador R3M 6.35 mm (extended bullpup) at a low price of RUB 80,990. You can pay for your order by mail upon receipt in any part of the Russian Federation. Before placing an order, be sure to check the price and contents of the product by phone (during business hours) or by e-mail and feedback system (at any time convenient for you).

Information on the product “EDgun Matador R3M 6.35 mm air rifle (extended bullpup)” is for informational purposes only and is not a public offer, defined by the provisions of Article 437 of the Civil Code of the Russian Federation; characteristics, appearance, color and equipment may be changed by the manufacturer without notice.