Which gun is better than MP-155 or MP-156: comparison, characteristics, differences

MP-155 or MC-21-12. What's better to buy?

Any hunter, and especially a beginner in this matter, needs a hunting rifle that would never let you down, would be accurate and accurate, and at the same time would be comfortable to make long walks while hunting. Of course, there are many other equally important factors, such as the supply of ammunition or the presence of the possibility of additional upgrades to the gun. In this article we will try to compare two domestic semi-automatic smoothbore guns: the legendary MP-155 and the no less famous MC-21-12.

What you need to know before buying

When purchasing a gun, beginners should know several nuances that allow them to legally purchase small arms and store them at home. First of all, you need to have a license, which requires constant renewal. In order for a person to purchase smooth-bore weapons, he needs to collect the following documents:

1. Medical certificate in form 146-1.
2. Photo 3x4 in duplicate.
3. A completed application form for the purchase of smooth-bore weapons.

1. A report from a local police officer, which states that the future owner has an iron safe.
2. Receipt confirming payment of the state duty.
3. Photocopy of passport.
4. Information about your place of work and position, as well as your work phone number.
5. Have a hunting license in hand.
6. Registered taxpayer identification number.

After collecting all the required documents, you must contact the LRO, indicating the make and model of the desired gun. After this, the application will be considered within 10 days and a verdict will be rendered. If the answer is positive, the person who submitted the application is given a license with which he can go to a gun store and buy the necessary weapons there.

As you can see, according to one of the documents provided, the future owner is required to have a special safe, of which the authorities must be aware. This is due to the fact that there is a list of laws that regulate the storage conditions of certain weapons. The same applies to the smoothbore type, which includes the Izhevsk MP-155.

Shotgun MTs-21-12: characteristics

The Tula self-loading, smooth-bore hunting rifle MTs-21-12 was published in 1958. Over such a long period of time, this hunting semi-automatic has proven itself exclusively on the positive side. The time-tested hunting rifle MTs-21-12 is produced in 12 gauge, chambered for 70 mm, with a barrel length of 750 mm. The under-barrel magazine holds four rounds, plus one more round can be added to the chamber. The automatics of the Tula self-loading hunting rifle MTs-21-12 are simple and reliable, using the Browning principle, that is, recoil and partial recoil of the barrel after a shot.

The stock and forend of the MTs-21-12 are made of walnut or beech and impregnated with a special compound (for piece execution).

MTs-21-12 – owner reviews

One of the most important advantages is the extremely high reliability of this semi-automatic Tula shotgun: according to technical documents, the MTs-21-12 smoothbore shotgun is designed to fire at least 10 thousand shots. However, in practice, even with mediocre care for the MTs-21-12, you can fire at least 15 thousand shots from it, and even more with proper and careful care.

The MTs-21-12 has an accurate and precise shot: at the usual distance for a smooth-bore weapon of 50 meters, this gun confidently hits a target with a diameter of 50 cm, while the spread of the shot charge is very low.

The MTs-21-12 smoothbore shotgun has several modifications. Thus, the MTs-21-12 R modification has a rubber butt pad on the butt, which reduces the already small recoil. There is also a variant MTs-21-12 RM, which also has a rubber butt pad to soften recoil, and is equipped with interchangeable barrel attachments that increase the quality of combat. The next advantage of the Tula semi-automatic gun can be considered its perfectly balanced weight distribution, that is, this gun fits perfectly in the hands and is convenient to shoot offhand.

Among the disadvantages of the MTs-21-12 hunting rifle, it should be noted that it does not allow you to carry out an upgrade yourself: for example, you cannot install an optical sight on this gun, since there are no special grooves on the receiver cover. The chamber is designed for use with ammunition with a case length of 70 mm, that is, for a conventional cartridge. The gun itself is very demanding when it comes to the choice of ammunition: it can operate reliably only when using factory-made 12-gauge cartridges in a plastic or paper case. Using any other cartridges that are not factory-made will lead to jamming, which cannot be eliminated without disassembling the gun.

Characteristics of the MP-155 shotgun

The Izhevsk smoothbore semi-automatic shotgun MP-155 is significantly “younger” than the MTs-21-12, since it appeared only in 2014. year. The MP-155 shotgun itself is an improved version of the MP-153 semi-automatic weapon, which has long been discontinued. The automation of the MP-155 smooth-bore self-loading shotgun is based on the use of the energy of powder gases. When fired, the gases push the piston, which is rigidly coupled to the bolt, which leads to reloading of the gun. The MP-155 automation itself has automatic adjustment, that is, when using a regular 70 mm. cartridge, part of the powder gases is released through special valves.

The MP-155 is produced in 12 gauge, with a chamber length of 76 mm, that is, for a reinforced cartridge. The barrel length, depending on the modification, can be 540 mm, 610 mm, 640 mm, 710 mm. and 750 mm. The capacity of the under-barrel magazine is 4 rounds, plus an additional one in the barrel. The butt and fore-end of the MP-155 hunting rifle are made of birch (for the ordinary version), beech or walnut (for export or piece version).

MP-155 – owner reviews

The undoubted advantages of the MP-155 include the simplicity and reliability of the automation: with proper care and timely maintenance, this gun can last for several decades. The accuracy and accuracy of the shot of this gun is very high: a target with a diameter of 50 cm is confidently and accurately hit from a distance of 50 meters, while the spread of the shot is minimal, which guarantees a successful and accurate shot during the hunt.

The MP-155 has a ventilated rear sight and a clearly visible front sight, which makes aiming easier. Moreover, the gun is equipped with a dovetail rail, which makes it possible to install an optical or collimator sight, which makes shooting much more effective.

The MP-155 has many modifications, so choosing the appropriate option will not be difficult. The Izhevsk semi-automatic machine has incorporated all the technical innovations.

Among the shortcomings, it can be noted that the build quality, especially in ordinary models, is not very good. There are unnecessary gaps, the wooden parts do not fit well with the metal ones. When using non-factory-made ammunition, it will inevitably lead to jamming of the gun, which will be very difficult to eliminate.

Storage conditions for smoothbore weapons

According to the order of the Ministry of Internal Affairs of Russia No. 288, which was received on April 12, 1999, a list of conditions was determined, as well as requirements according to which it is necessary to store hunting weapons, as well as ammunition for them. If we consider this act, we can see that weapons should be stored separately from:

1. Gunpowder.
2. Cartridges.

In this case, the latter must be sorted according to their properties, as well as the pyrotechnic compositions used. Since legislation imposes certain restrictions, it is advisable to allocate a fairly large space for storing guns and ammunition. You can also resort to installing a gun safe. These structures are quite tall, so they are attached to the wall to avoid tipping over when the door is opened. Some manufacturers offer embedded systems for greater reliability. They are great for installation in private homes.

According to the law, weapons and ammunition can be stored not only at the place of registration, but also at the place of actual residence of the owner. The main aspect is the presence of a special safe with an installed lock. If access to a gun is open to unauthorized persons, then this is a violation of the law. There are several types of safe locks that allow you to restrict access to third parties:

1. Mechanical. The simplest type of lock. It is unlocked by entering a specific code on the digital panel. They are a rather unreliable system, since over time the code buttons begin to differ due to constant use. To increase security, it is recommended to change passwords as often as possible.
2. Key. One of the simplest and most common types of locks. The downside is the fact that the key may have a duplicate, which could be used by unauthorized persons, and if the key is lost, you will have to open the safe using brute force.
3. Electronic. The most advanced type of locks, allowing the gates to be unlocked only when biometric data is read or when the required code is entered. There are also models that can be opened using contactless key cards.

But the best option for locks is a combination of several types. This will improve storage security. Apart from locks, there should be other security aspects. Thus, the walls of a weapons cabinet for storing MP-155 should be no thinner than 2 mm. The requirements also stipulate that the safe must be fireproof and burglar-resistant. Capacity parameters should be based on the size of the gun, taking into account the fact that a separate shelf is required for cartridges.

There are no requirements to purchase a cabinet from a specific manufacturer, so you can either buy a ready-made cabinet or ask for a custom-made model. And especially skilled people can independently perform all the necessary work, the main thing is that the resulting structure meets all the necessary requirements.

MP-155 shotgun: pros and cons, review of modifications, buying tips

The MP-155 is an ideological development of the legendary MP-153 gun, which, in turn, was a creative rethinking of Beretta’s reliable gas-operated automatics on the successful chassis of another popular gun - the IZH-81 pump.

It was originally designed for the American market with its dominance of supermagnums, and was very much loved by Americans for its price and reliability. The gun has found great popularity in hunting, sports, and even appeared in several computer games.

MP-153 has become one of the most popular shotguns for IPSC in the “standard” class due to the low cost of spare parts and ease of maintenance

.

Well, in its homeland it became the most popular “goose” and the most widespread semi-automatic among hunters.

The design is based on a wedge-locking bolt and an annular gas piston located around the magazine tube. The system was extremely simple, reliable and had an excessive resource, for which you had to pay with weight - the gun in plastic weighed 3.5 kg. The gas block is equipped with an automatic valve, so it accepts all weights from supermagnum to sports 24 grams, although on the latter the automation can be capricious and will need to be adjusted.

Of course, the MP-153 also had its drawbacks, taking into account which Izhmekh created the current iteration of this gun - the MP-155.

Differences between MP-153 and MP-155

The most serious changes affected the size and weight of the receiver: the chamber was reduced to 76mm (in the basic version) and the removal of metal in non-critical places made it possible to lighten and shorten the receiver.

The next important feature is the transfer of gas exhaust mechanisms to the gas chamber, changing the piston and thrust. This significantly affected the weight and balance of the gun, now the weight did not exceed 3.25 kg. Due to the change in the recoil vector, the gun began to kick less, and the accuracy during tempo shooting increased.

What is the MP-155 shotgun suitable for?

As we mentioned above, first of all, the gun attracted the attention of goose hunters. The long barrel and cartridges with large loads are perfect for catching a goose on the fly: a good, dense sheaf reliably hits a goose that is tough to wound, even at a relatively high altitude. Of course, the gun is good not only for him, but also for all other flight hunting.

The gun is also suitable for driving: thanks to the omnivorous nature of the automation and reliable reloading, it allows you not to miss the animal’s exit to the number.

For running hunting, the gun may seem a little heavy, although there are quite a lot of fans of this use.

In addition to hunting, the MP-155 is also used in sports, including practical shooting in the standard class. Cheap spare parts and ease of maintenance during colossal sports shootings are a very significant argument.

Reviews 2022

Andrey Egorov, 43 years old, Kopeysk.

I want to tell you about the famous smoothbore shotgun MP-155 with a 750 barrel. This model was intended to replace the previously existing MP-153. As experience shows, I successfully replaced it. Compared to the MP-153, the new gun has become more grippy on the butt and more streamlined. The MP-155 lies comfortably in the hand; the barrel is made of high-quality weapon steel. The set includes 3 plastic stands for moving the butt under the shooter. There are also disadvantages. The gas assembly seems to have had its edges processed and soldered. Multiple adjustments are also necessary for the mechanism in the gun to work properly.

Alexey Okhotnikov, 31 years old, Volgograd.

I chose the gun for a long time, looked closely, asked prices, read reviews. I even watched a video on YouTube of how different models work. I tossed between Russian and Turkish production, and eventually settled on our Murka. I purchased an MP-155 with a 750 barrel, and have never regretted it yet. The very first hunt left a very good impression. I'm delighted with the gun! Takes all the cartridges in a row, including the most inexpensive ones. From 50 meters the bullets hit each other. I haven't shot at longer distances yet. Before this model, I hunted with TOZ-34, it was also good, but after acquiring this it immediately faded into the background, I gave it to my brother. I took the gun in plastic. I also changed the stand under the butt, after which it fit perfectly to the shoulder.

Lev Maltsev, 27 years old, Berezovsky.

I purchased the MP-155 shotgun back in 2016. There are many advantages, among which omnivorousness especially stands out. At the same time, the gun itself is quite light. But personally, I encountered some shortcomings. First of all, when worn “over the shoulder,” the safety lock is often removed, and this happens quite often. Sometimes the trigger jams; this issue first appeared after six months of shooting. In order to fix it, you have to completely discharge the mechanism.

Maxim Koltashev, 36 years old, Lipetsk.

I purchased it after receiving the MP-155 permit back in 2014. The price of the gun is inexpensive. At the same time, no special care is required, and it shoots quite accurately. But when buying, you need to be careful, because they often sell low-quality models. So, they tried to sell me a gun with an adjacent barrel, which is extremely unacceptable. But it’s good that the seller was normal and quickly changed everything for me. The problem with jamming after reloading was also encountered; the situation was corrected by processing the sharp edges of the barrel using a needle file.

Zakhar Rubinov, 44 years old, Votkinsk.

I spent a long time with the MP-153, but decided to switch to a more modern model. I didn’t change Izhevsk and bought an MP-155. The gun seems to be the same, but very different, this is especially noticeable when you just pick it up. Different weight, different sensations. After several shooting seasons, I can say that the reliability of the previous model has been inherited. Quite convenient when using cartridges with 70 and 76 mm sleeves. I haven't encountered any problems yet.

Advantages and disadvantages of the MP-155 shotgun

Now the gun has to compete with Turkish manufacturers, who have filled the market with similar semi-automatic guns at a comparable price. But still, the MP-155 has advantages over imported guns:

Simple design of automation and shutter with wedge locking. The simpler the better, especially when it comes to weapons that must be reliable;

A huge number of cheap and accessible spare parts, simple and quick repairs. For those who shoot often and a lot, this is important;

Excess resource. With careful care, the gun will most likely go to your children, and maybe even grandchildren;

Simplicity and accessibility of modifications. A huge number of accessories, additional equipment and body kits have been produced for the gun. If desired, you can use it to assemble both a sports “blaster” and a menacing-looking tactical shotgun.

Of course, there are also disadvantages, but they are rather typical for all domestic weapons in general.

Low quality of finishing and fitting of parts. The jokes about the “file included” didn’t just appear out of the box; the gun needed some work out of the box;

The need for “break-in” for the normal development of automation components; the gun begins to reliably reload after 150-200 shots;

Poor coating of metal parts; oxidized steel quickly becomes covered with saffron milk caps, especially if care is neglected.

Complete disassembly of the gun

Considering that the design of the MP-156 cannot be called simple, it would be wrong on our part not to introduce the reader to the algorithm for completely disassembling the model. Here is a small instruction, following which you will not have any problems:

1. We unscrew all the nuts located on the forend of the weapon.
2. Remove the wooden forend.
3. Press the shutter tab and move the moving parts down 5 cm.
4. Hold the load and remove the foot.
5. We remove the weight, rods, bolt and return spring.

After this, you can begin servicing the rifle (cleaning, lubricating or replacing parts). Disassembling the trigger mechanism only makes sense in cases where there is a serious breakdown of one of the systems.

Design of MP-156

Versions of the MP-155 shotgun

What do the abbreviations in the name of the gun mean?

Since 2011, a huge number of modifications have been released; we will try to list the most common options and their differences.

The names use a code of nomenclature abbreviations, which allows you to understand what configuration the weapon comes with; here is its decoding:

d/n

— choke tubes, the quantity included in the set is indicated, one tube is installed in the barrel;

der./pls

. — material of the forend and butt — wood and plastic. Plastic is practical, wood looks and feels nice and warm;

op. /b. /ber

. — type of wood: walnut, beech, birch. The varieties are distinguished by their hardness and appearance, birch is the softest and cheapest, walnut is expensive and beautiful;

nickel

— nickel-plated trigger, silver color;

nitrate tit.

— trigger coating with titanium nitride, gold color;

colorm

. — modification with a colored front sight on the sighting bar, provides quick aiming and convenience when shooting bullets;

cut-off/cut-off/ShRM

— cutoff for supplying cartridges to the tray from the magazine. Allows you to quickly load the required ammunition without emptying the magazine;

Monte Carlo

— version with anatomical butt;

exp

. — export version, characterized by improved processing and fitting of parts;

Some additional features

In addition to the main technical innovations, this gun also has a mousse of less significant, but quite interesting properties for some consumers that its predecessor did not have. Thus, separate copies have appeared that are designed specifically for left-handed owners. Due to the additionally installed Dovetail strap, it became possible to install additional sighting equipment, which will be very useful for athletes.

The unique design allows you to install an additional barrel without metal work. This allows you to perform these operations without going to specialized workshops. Also, the design of the mechanism allows you to temporarily disable the automatic supply of cartridges from the magazine. As a result of this, even with a full magazine, you can fire shots with other types of cartridges.

MP-156. The second act of the Merlezon ballet.

After writing an article about the “inertia” project in Izhevsk, in which we talked about a semi-automatic shotgun operating on the recoil principle of all weapons in general and about the MP-156 in particular, time passed. At that time, the release of the MP-156 semi-automatic was just announced, there was little information about the new inertial self-loading, so in that article I mentioned it only in passing. And now, almost a year later, in November of this year 2022, I had the opportunity to inspect the long-promised new product from Izhmekhzavod, and not only inspect it, but also compare it with a similar “classic” gas vent self-loading MP-155. Now I want to continue the topic I started and share the results of comparing samples, move on, so to speak, to the second part of the Merlezon ballet.

By the way, the Merlezon ballet is directly related to the hunting theme - it is supposedly a ballet about hunting blackbirds, personally composed by one of Louis in honor of his favorite pastime. Here's how. A whole ballet of 16 acts about some blackbirds! Which nowadays almost no one looks at, so, occasionally, only due to the lack of other game, individual hunters sometimes pay attention...

So, there are two guns. Judging by the numbers, both were made around the same time and very recently.

First of all, let's weigh and measure. The MP-156 sample pulled out 3.22 kg, which is quite heavy by today’s standards. However, the compared MP-155 is almost not inferior to it in weight - 3.18 kg, by the way, this value turned out to be one hundred grams more than the first guns of this model, released by the plant in 2012.

The length of both samples is 1230mm. The length of the MP-155 barrel is 710 mm, and the weight is 1.02 kg, the MP-156 barrel is almost the same, 709 mm, its weight is 0.98 kg - the difference is almost imperceptible and is explained by the longer and more massive gas outlet strut of the MP-155 barrel. But the moving parts of the MP-156 weigh one and a half hundred grams more - 0.66 kg versus 0.5 kg for the gas outlet.

Already during disassembly, the difference in the return springs caught my eye - on the MP-156 spring the wire is thinner, the winding pitch is larger, and, as a result, there are fewer turns. This suggests that the MP-156 return spring is much weaker. This was confirmed when cocking the bolt - on the inertia, the retraction force at the beginning of the stroke is approximately 2-2.5 kg versus 4.5-5 kg ​​for the MP-155. We can confidently say that the “inertial” principle of operation of the MP-156 automation uses much less energy from the moving parts than the gas outlet.

It follows that the MP-156 should be more sensitive to weak cartridges. If the MP-155 still has some hope of being able to adjust the gas engine by adding vented gases (more precisely, by reducing those released by the valve), then taking the same path and simply making the moving parts of the inertia engine heavier will most likely not work.

An “inertial” spring is mounted on the front part of the part, which in the gas outlet is a piston, and in the MP-156 passport is called a load. It rests against the weight at the back, and against the bushing at the front, which in turn rests against the barrel post. From the outside, the spring and bushing are covered by a glass connected to the load. When the spring is compressed against the mass of the recoil parts, which tend to remain in place when the gun recoils after a shot, energy is stored, which, after the pressure peak in the chamber subsides, moves the moving parts of the automation back. With such an interaction scheme, the mass of moving parts is significant. It is all the more surprising that the bolt locking wedge (and this is one of the recoil parts) is lightened to the limit. Probably, with the energy reduced relative to gas exhaust, even a small difference in the mass of the parts attached to the leading moving parts during their movement back in the receiver is important. Theoretically, everything is in accordance with the principle used in the Kalashnikov assault rifle - heavy frame and light bolt.

Design

As mentioned at the very beginning, the design of the weapon is based on a gas exhaust system and an inertial mechanism. This means that to reload the gun you will not need to independently remove the spent cartridge case and insert new ammunition into the chamber. The weapon will perform all actions independently after firing.

Gas venting mechanism

The difference between semi-automatic shotguns with a gas outlet is that there is a special hole in the barrel channel, designed so that part of the powder gases at the moment of firing affects not the shot or bullet, but the reloading system. This hole goes to the gas exhaust chamber, which contains a special piston. As soon as gases begin to act on the piston, it opens the shutter. Along the way, at this moment the spent cartridge case is also ejected under the action of the extractor and the mainspring is cocked. This design may seem quite complicated, but it has a number of huge advantages:

• fast recharging system;
• ability to work with various cartridges;
• Full interaction with any body kit.

Although it is worth admitting that opponents of the semi-automatic reloading system are right in one thing - a gun with such a mechanism turns out to be too bulky and also difficult to disassemble. The first problems will arise when cleaning the model - it is almost impossible to get to small parts without special tools, and without regular lubrication the gun will refuse to reload.

Inertia mechanism

The operation of the inertial mechanism begins at the moment when the used spring is already ejected under the action of the extractor, and the firing pin is in the firing position. All actions begin with the movement of the return spring, which captures a new cartridge from the magazine and then sends it into the chamber. After this, the shutter is locked with special hooks that belong to the security system. There is no need to remove the weapon from the safety catch after reloading, since its mechanics are engaged only when the first cartridge is cocked into the chamber (mechanically).

Butt

The butt of the MP-156 weapon is made of walnut wood, coated with a thin layer of varnish. If desired, it can be replaced with a polymer analogue, which is lighter in weight but more susceptible to mechanical damage. The original buttstock has a rubber butt plate that acts as a shock absorber and a metal swivel intended for attaching a belt.

In general, the design of the MP-156 weapon does not cause any serious complaints. The reloading system is made in a traditional style, like that of some Kalashnikov assault rifle. The gun also has the ability to install additional choke constrictions, which allows hunters to adjust the accuracy for shooting from different distances.

New in the world of shotguns: what's good about the MP-156?

MP-156 is the first smooth-bore self-loading shotgun with an inertial operating principle in the Baikal line. The new product is being actively discussed. Here are a few examples of gun evaluation in our material.

At the beginning of last year, information appeared on the Internet about the development at Izhmekhzavod of the first sample of an inertial shotgun semi-automatic device, which received the index MP-156. According to information posted on the Kalashnikov Concern website, the MP-156 has a very high degree of unification (more than 90%) with the popular and well-proven MP-155 in terms of technology and reliability. The inertial-type automation engine is located in place of the MP-155 gas engine. Instead of a piston, a weight is installed, which, under the influence of inertial forces when fired, compresses the working spring. The MP-156 mechanism is designed to operate with all types of hunting cartridges 12/70 and 12/76 with a projectile weight of 32 grams or more. The magazine holds 4 rounds. The total length of the gun is 1245 mm, its weight is 3.1 kg.

According to the shooters, the new gun differs from the MP-155 mainly in the lower force of cocking the bolt, while the recoil turned out to be indistinguishable from the MP-155, notes the author of the article on the portal “Gunsmith Lane”. The weight of guns with the same configuration varies very slightly (the MP-156 is about 50 grams lighter than the 155). From the factory, the gun will be configured for standard 12-gauge loads - that is, with 28 grams or more, it should ideally work without problems; for “sporting” 24 grams, it may be necessary to adjust the preload of the working spring.

“Judging by the fact that not so long ago representatives of the plant spoke quite sharply for gas exhaust and against inertia, the idea and development of the gun was carried out mainly on the private initiative of one of the designers, without taking into account long-term production plans, and only then it was decided to make samples and conduct tests that gave quite successful results,” notes the author of the article.

Probably, after this, the plant management was faced with the problem of launching a new model into mass production, and the need to produce a second, almost similar, model is quite controversial - costs, the range of equipment and the complexity of organizing production, especially with our certification system, are growing, but will production and sales volumes increase? - quite difficult to predict. Problems with patent purity are also quite possible; costs may also be necessary for this.

Until now, the plant’s technical policy was quite clear: there are export orders - MP-153 has been developed. It sells well, but a lighter one would be needed for running hunting - the MP-155 appeared. The need for a transition from gas exhaust to inertia is, at a minimum, not so obvious. Of course, there is a demand for inertia. And having a choice between gas exhaust and inertia is also very good.

After the release of the new weapon, hunters began to actively share information about how the new gun behaves. Very useful information on this matter is provided by the Kalashnikov portal, whose editors conducted tests of the MP-156. As a result, it was experimentally possible to find out that when assembling a weapon in some positions, the return spring interferes with the installation of the barrel in the receiver. The problem can be easily resolved - you need to rotate the spring to an arbitrary angle. Owners of new items should be careful with this point. Another important point is the too low actuation force of the safety button. Measurements showed approximately 350 g. Based on this, the owners of the new gun came to the conclusion that such a fuse could not be considered safe.

As for the general impressions, the MP-156 was rated as a completely complete gun for its price category (the thoroughbred base - MP-155) affects it. According to information published on the Kalashnikov Concern website, such a weapon will cost 31,400 rubles. The adaptability is reasonable, loading and all other manipulations are convenient, the recoil with the used cartridge is expected and moderate, and does not provoke discussions about comparing the comfort of shooting from “gas vents” and “inertial guns”. The only significant ergonomic drawback, inherited, by the way, from the MP-155, according to the authors of the review, is the presence of a useless “tail” at the bottom of the proprietary rubber butt pad. It catches on clothing when moving the weapon down. It is also worth noting that per 100 shots, NRG cartridges produced two fist-sized bursts of flame from the receiver window. In both cases, the automation worked normally - recharging occurred.

Morgenstern on Hardcore. Piraev vs Kovalev. Proud in the octagon. 1/16 grand prix

Show Control Panel

• Published: Aug 13, 2021
• Return up to 100% of purchases per month from a Tinkoff debit card in a cool design - l.tinkoff.ru/hardcoreau Help reach the goal and collect 2500 installs. Download Raid: Shadow Legends for free clik.cc/u9CyM and start collecting your Champions! The general sponsor of HFC MMA is OLIMPBET. All sporting events in the world, high odds - on the website and in the best mobile application. Follow the link in the pinned comment, register, activate the promotional code HARD in your personal account, top up your account with 1000 rubles and receive an additional two free bonuses of 500 rubles each. Morgenstern on Hardcore MMA - the most scandalous rap artist in Russia breaks into Hardcore MMA. Piraev vs Kovalev - announcement of the long-awaited rematch between Marif Piraev and Vladislav Kovalev in the HFC MMA octagon. Gordey in the octagon - Dima Gordey flies into the Hardcore octagon and does a harddown with Alisher Morgenstern. 1/16 Grand Prix - exciting fights between fighters who will fight for access to the next stage of the Grand Prix with a prize fund of 5 million rubles. Divnich vs Bayramov - in the main fight of the issue, M-1 Global champion Maxim Divnich and European pankration champion Erziman “Sabziro” Bayramov will compete. Official online store Greenhill.ru discount using promotional code HARD -25% on all products clck.ru/WLC3S FILIPPOV sparring partner simulator with a 20% discount using promotional code “Hardcore” filippov-dynasty.ru/catalog-e. Official partner of HFC MMA - Vi Sano Products for restoring injuries and increasing physical performance, consisting of natural components Vi Sano - a modern approach to health. 25% discount with promo code: HARD. vi_sano_shop?ut. Leading a healthy lifestyle is easy with the Pride network of fitness clubs: pride-fitness.ru Our social networks: Inst: hardcore.fi. Inst HFC MMA: hardcorefc_mma Telegram: t.me/hardcorefighting TikTok: vm.tiktok.com/ZSJjbc21T/ Timecodes: 00:00 - Beginning 03:13 - Morgenstern on Hardcore 09:23 - Sly Lakets vs Perfumer 19:07 - Guliev vs Kovalev 33:34 — Kovalev vs Morgenstern 35:32 — Kovalev vs Piraev 44:46 — Madrakhimov vs Dalgatov 01:05:10 — El Panther vs Ataman 01:15:01 — Pamir Captain vs Armyets 01:28:13 — Bayramov vs Divnich 01:56:40 — Morgenstern vs Gordey Tracklist: Track: hyeongyun — movin Music provided by Beast Trap Watch: thexvid.com/video/KC_HpUIVM6c/video.html Free Download/Stream: hypeddit.com/link/qmprfr Track: 22 Void Beats & Slanks — Berserk Music provided by Beast Trap Watch: thexvid.com/video/e3iNecwCUa0/video.html Free Download/Stream: hypeddit.com/link/ofwwcn

Comments • 16,879

Register using the link and get a bonus from OLIMPBET of 1000 rubles for new clients using the promo code “HARD”. bit.ly/3h4CuRe

@Sergey Vladimirovich The multi-million audience of Hardcore will appreciate your definitions) And in the eyes of normal people, Shlemenko even now looks inadequate)

@Mike Tyson Doesn't annoy anyone

@Medvedev Dmitry Believe him, he doesn’t give a damn about isolation from hardcore and how he looks in the eyes of young drug addicts and all sorts of corrupt skins. And in the eyes of worthy people, he just looks like a real man and a fighter.

Shame hardcore. Some freaks of commentators can’t say kindergartens normally

Look for the site from my nickname in the browser and watch naughty girls from 1 to 16 yo ❤

Marif is on top, as always. And the bull with a lopsided nose is puffing something inaudibly, but this fight is a beautiful Belaz, and his opponent is walking around after the fight. Not pretty

if it weren’t for Morgen there would have been 1 million views here. And let Kovalev say thank you to Alisher that more than 2.5 million people saw him. Kovalev’s head has been knocked off for a long time, he’s trying to hype him up, he’s making a fuss about a beer guy weighing 55 kg

Belaz ate something, Marif krassauufchyk! Belaz ‍♂️