Cooled SHP pistol Yarygin PYA SKh (Molot Arms, 10x31)

Cooled SHP pistol PYA-SKH (Yarygina) 10×31

Characteristics:

Description of the cold Yarygin pistol PYA-SKH:

The cooled PYA-SKH chambered for a blank cartridge is made from a real pistol! The automatic shutter works as on a combat version.

Technical changes have been made to the main parts of the product, eliminating the possibility of firing a live cartridge from it or using its main parts:

• the barrel has a new chamber for 10x31 mm caliber;
• a bushing is installed in the barrel bore, secured with two pins;
• the combat stop has been removed from the barrel breech;
• an angle is made on the bolt extraction window at the place of the combat stop.

The Yarygin PYA-SKH pistol, decommissioned by the SHP, is a military weapon decommissioned from the warehouse, subjected to a number of design changes for the purpose of cooling. The Yarygin pistol replaced the PM pistol, which did not meet modern requirements. Design Bureau under the leadership of V.

In 1993, Y. Yarygina proposed her latest development - a self-loading 9-mm pistol, and in 2003 the PYa was adopted and began to enter military units, the internal troops, as well as units of the Ministry of Internal Affairs and other law enforcement agencies of our country.

Mass production of PV began in 2011. In addition to being used by the Russian Armed Forces, the Yarygin pistol is in service with security forces in Armenia, Belarus, Lithuania, and is also used in Kazakhstan as a sports and training weapon. The design features of the PY allow you to install a Weaver rail and a tactical flashlight with a target designator on it.

Yarygin's cooled PYA-SKH pistol is fully automatic and fires in semi-automatic mode.

If 9 mm caliber cartridges are suitable for a combat analogue, then Yarygin’s pistol, converted into a blank, fires 10x31 mm ammunition, the same as for a blank PPSh.

In accordance with Russian legislation, the magazine of a deactivated PY can hold 10 rounds of ammunition.

A special feature of this weapon is the fact that the pistol is suitable for both left-handed and right-handed shooters, since it uses a safety lever that extends on both sides. Its lower position is combative. When the magazine is completely fired, the pistol is placed on the bolt slide.

The cooling of the Yarygin pistol was carried out at the Molot Arms plant, and consists of the following changes in its design:

• two pins appeared in the barrel bore, which, however, do not interfere with the full escape of fire and smoke;
• one bolt guide removed by milling;
• a seam appeared on the right slab;
• The left bolt guide is completely welded, making disassembly and reassembly impossible.

The deactivated PYA-SKH pistol can be used for entertainment, as training equipment, and also as a signal weapon. It will be a wonderful gift for all gun lovers.

Information about the characteristics, configuration, appearance and color of the product is for informational purposes only.

; they are subject to change by the manufacturer without notice.

Weapons decommissioned, cold, Yarygin model PYA-SKH

PURPOSE of Yarygin’s cooled pistol “PYA-SKH”

The weapon is a decommissioned, cooled "PYa-SKh" model chambered for light-sound action in 10x31 caliber and is intended for use for cultural and educational purposes, namely for collecting, military-patriotic education of youth, educational activities, participation in film and theater productions, historical reconstructions. The product can be used in areas with temperate and cold climates at ambient temperatures from minus 30 to plus 30'C.

BASIC TECHNICAL DATA of the Yarygin “PYA-SKH” cooled pistol

COMPLETENESS of Yarygin’s cooled pistol “PYA-SKH”

Weapons decommissioned, quenched model "PYA-SKH" - 1 piece. Magazine -2 pcs. Packaging Passport PYA-SKh PS

DEVICE AND PRINCIPLE OF OPERATION of Yarygin’s cooled pistol “PYA-SKH”

The trigger mechanism ensures the production of a single shot. To increase the durability of the product and corrosion resistance, the cartridge-nick can be chrome-plated. The principle of operation of the product is as follows: When you press the trigger, the trigger breaks off the sear, and under the action of the return spring, it moves vigorously around its axis, the firing pin pierces the igniter capsule, which ignites the powder charge of the light-sound cartridge. Powder gases rush through the labyrinth of the barrel and pass through the muzzle of the barrel with a loud bang and flash. A shot is simulated. During recoil, the bolt moves back due to the energy of the powder gases, the cartridge case is removed from the chamber and, when interacting with the protrusion of the reflector, is thrown out of the weapon, while the hammer is cocked. When the bolt moves to the extreme forward position, the cartridge from the magazine is sent into the chamber, the ejector jumps over the rim of the sleeve.

When the trigger is pulled again, the cycle repeats.

PREPARATION AND OPERATING PROCEDURE for the Yarygin “PYA-SKH” quenched pistol

Preparing “PYa-SKh” for work is necessary: ​​- wipe the chamber dry if there is lubricant and powder deposits there; — lubricate the rubbing surfaces of the product and magazine. The product is ready for use.

Turning the fuse on and off. Turn on the fuse - press the fuse box with your finger, turning it upward until it clicks. The trigger is locked. Turn off the fuse - press the fuse box with your finger, turning it down.

Procedure for simulating shooting: Attach the magazine to the product. Move your hand to move the bolt back to its rearmost position. Release the shutter; the moving parts will vigorously return to their most forward position. To simulate a shot, press the trigger. To produce the next simulated shot, repeat step 4. When the magazine runs out of cartridges, the moving parts will remain in the rear position. Rent a store. Equip the magazine with cartridges and attach to the product. Press down on the bolt stop lever. The product is loaded and ready to simulate a shot.

The order of unloading "ПЯ-СХ": - separate the magazine; — move the moving parts back and remove the cartridge from the chamber; — pull the trigger; — empty the magazine of cartridges.

MAINTENANCE of Yarygin’s cooled pistol “PYA-SKH”

Operational Maintenance

Partial disassembly Partial disassembly is carried out to inspect the product for cleaning and lubrication after firing. Procedure for partial disassembly: 1. Make sure that the product is in good condition. To do this, separate the magazine and move the bolt back, inspect the product. 2. Separate the bolt stop from the axle, to do this, remove it from engagement with the shackle on the right side of the product and remove it to the left side. The product is ready for cleaning and lubrication. It is impossible to completely separate the barrel and bolt from the product.

Cleaning and Lubrication

Clean and lubricate regularly. After placing the bolt on the slide stop, thoroughly clean the chamber, the inner surface of the bolt and the frame. If cleaning is impossible, the product must be lubricated with RJ oil as soon as possible. Clean the barrel labyrinth using special chemicals and blowing with compressed air.

In winter, cleaning is carried out indoors with an air temperature of 20+5'C after the product has warmed up to room temperature. To clean the product, use clean wiping material (rags, tow) free of sand and solid particles. Liquid cleaning agents may be used for cleaning.

Lubrication should be carried out depending on temperature conditions. Thickening of the lubricant on the mainspring and return spring is unacceptable.

Storage Maintenance

To keep the product in working condition, it must always be cleaned and lubricated with a thin layer of gun oil. The product should be stored in a dry room without sudden temperature fluctuations, away from heating devices and in the absence of aggressive impurities in the ambient air. To avoid permanent deformation of the mainspring, the hammer must be released.

RESOURCES, SERVICE LIFE AND STORAGE, MANUFACTURER WARRANTY

The manufacturer guarantees the quality and reliable operation of the product subject to the operating rules. The warranty period is 18 months from the date of sale with operating time not exceeding 2000 shots.

The consumer's requirements in the event of defects in the product identified during the warranty period are satisfied by the manufacturer in the manner prescribed by the Law of the Russian Federation “Protection of Consumer Rights”.

Natural wear and tear of the protective coatings of product parts during operation, including the chrome coating of the chamber and other parts, is not a defect.

The product is not subject to major repairs.

Irreversible technical changes have been made to the PYA-SKH product, eliminating the possibility of firing from it or using its main parts:

— the chamber is cut to fit 10x31 caliber, a sleeve is pressed into the bore and two pins are installed;

— the combat stop on the barrel casing has been removed;

— on the pistol frame, the left guide was cut off by milling;

— a welding seam is applied on the right plate of the shutter to exclude the possibility of using the frame in a combat model of this product;

— the left bolt guide is welded to eliminate the possibility of disassembling the pistol and removing the barrel;

- the shutter is non-removable.

Note! This product is certified and is available for free sale. No permit is required to purchase agricultural products.

The weapon is decommissioned. emasculated “PM-SKH” is purchased without permits and licenses issued by the authorities of the Ministry of Internal Affairs at the place of residence and is not subject to mandatory registration with the authorities of the Ministry of Internal Affairs of the Russian Federation.

Buy agricultural enterprise Yarygina in Moscow at an affordable price!

Yarygin's empty pistol: through the pages of history

If you want to purchase a deactivated model of the PY, then you will probably be interested in learning about the history of the creation of this weapon. It begins with the need to manufacture a pistol that would replace the legendary PM.

In 1993, PYa was put up for competition, but took on the role of winner only seven years later. More time passed before it entered service. Thus, the weapon began to be used only in 2003.

Features of the cold Yarygin pistol

From us you can buy SHP PYa with minimal design changes. All of them were introduced in order to exclude the possibility of firing ammunition. In particular, the transformations affected the barrel part (a pin was welded) and the frame configuration (change in the structure of the guides).

Externally, the Yarygin SHP pistol completely replicates a military weapon. A distinctive feature of the model that immediately catches your eye is the semi-hidden trigger. It is no coincidence that this part has such a design. The developers made the trigger recessed to increase the convenience of removing the pistol and to eliminate the possibility of it getting caught in the shooter’s clothing or ammunition.

PYa belongs to the category of automatic pistols. The operation of the system was based on a scheme in which the barrel has a short stroke.

Technical characteristics of the cold Yarygin pistol

From the technical characteristics of the presented cold weapons, we note:

• product length - 198 mm;
• weight - 950 g;
• magazine capacity - 17 supplies;
• cartridge - 10x31 mm.

From us you can buy SHP PYa, as well as blank supplies for firing from this weapon. Managers are ready to answer all questions regarding the characteristics of the Yarygin pistol, which has undergone cooling.

Yarygin pistol SKhP SKh cooled pistol for blank cartridges 10x31 In stock!

Yarygin's pistol is cold. Manufactured by Molot-Armz. The Yarygin pistol is a Russian-made self-loading pistol. Just like the combat sound and naturally working automation, the light-sounding 10x31 caliber cartridge.

We have opened a showroom where you can view and buy the entire assortment of our website for decommissioned cold weapons - chp. Prices are the same as on the website! Big choice! We are located at Serebryakova Proezd, building 6 (Serebryakov business center). Call in advance!

I was pleased with another product. The Yarygin pistol is a modern weapon and having such a product means being in trend. Of course, there were some alterations, as the barrel was cut to fit 10 mm caliber. Shoots really powerfully. So deactivation did not affect the appearance and sound. Judging by the reviews, it’s worth buying, not a dummy in the form of a signal signal. So: The barrel - the chamber is cut to fit the caliber 10x31, a sleeve is pressed into the barrel bore and two pins are installed, the lug lug is removed from the barrel casing. The bolt - where the lug lug of the casing engages, an angle is applied .On the pistol frame, the left guide is cut off by milling. A welding seam is applied on the right plate to exclude the possibility of using the frame in a combat model of this product. The left bolt guide is welded to prevent the pistol from being disassembled and the barrel removed. General markings are applied directly to the bolt of the product. The abbreviations SO and GISch are applied to the barrel and frame of the pistol. Produced in a small edition of 28 pieces from real combat material, no mock-ups. Includes wiper, box, magazine, documents pistol. Deactivated: barrel 2 studs, welded onto the control frame, it is impossible to completely remove the barrel and bolt when disassembling. In 1990, the USSR Ministry of Defense announced a competition for a new pistol, designed to replace the one in service, but not PM pistol that fully meets modern requirements (R&D program “Grach”). In 1993, a pistol designed by Yarygin was presented to this competition. According to the test results, in 2000 the pistol (named MP-443 “Rook”) became the winner of the competition. In 2003, under the name “9-mm Yarygin pistol” (YA), it was adopted by the Armed Forces of the Russian Federation. As of the beginning of 2010, Yarygin pistols began to enter service with units of the Russian Armed Forces, internal troops, special units of the Ministry of Internal Affairs of the Russian Federation and other law enforcement agencies. In 2011, mass production of PYa for the Russian Army was launched[2]. In 2012, officers of the Western Military District began to use the Yarygin pistol as a new standard weapon. Weight, kg: 0.95 Length, mm: 198 Barrel length, mm: 112.8 Width, mm: 38 Height, mm: 145

Delivery in Moscow by courier, in Russia we ship by transport companies!!! Purchased without any permits or licenses!