Review of the Matador air rifle model line

Air rifles presented in the Matador model line are very popular among a wide range of consumers. This variation of the weapon is distinguished by good shooting characteristics, as well as the ability to operate in various conditions. Today, this rifle is available in three different configurations. Each of them has its own characteristics.

Edgun Matador brand rifles are positioned as weapons that were originally manufactured in a bullpup configuration. This means that the most important components, represented by the bolt and trigger, are located at the rear of the rifle. To be more precise - in the butt area. Thanks to such design features, manufacturers managed to achieve the most compact dimensions and extreme shooting accuracy.

Modifications of the Matador air rifle

The Matador air rifle is available in three different modifications with two different calibers (4.5 and 5.5 mm). For models aimed at the European market, another caliber version is relevant - 6.35 mm.

The main differences between existing configurations relate mainly to the dimensions of the product. In terms of design, the various modifications of the air rifle have virtually no differences.

The barrel of the weapon in all cases has twelve rifling, thanks to which the range and accuracy of the bullet’s flight is significantly increased.

The compressed air reservoir is made of duralumin. In addition, you should focus on the presence of a special mount for an optical sight. We are talking about the so-called Weaver bar.

Long version

Photo of the air rifle Matador extended version

The extended version of the Edgun Matador air rifle is the largest version of the weapon presented in the model line. With a total length of 890 mm, the weight of the product is equivalent to 3.1 kg. Such rifles are distinguished by high quality manufacturing and assembly.

In this case, they resorted to using beech to make the butt. The surface of this part of the weapon can be painted. In this case, mica or graphite is first added to the paint composition. The presence of these elements significantly increases the overall service life of the product.

Shooting and the sound of a shot from the Edgun Matador air rifle of the extended version:

All duralumin weapon parts are anodized, and steel parts first undergo a chemical oxidation procedure. The basic configuration of the extended version of the Matador air rifle is as follows:

• rifle;
• test target;
• charging connector;
• case;
• copy of the certificate;
• weapon passport.

Standard

Air rifle Edgan Matador standard version

In this case, the length of the rifle will be equivalent to 745 mm. The potential owner is asked to choose between 4.5 and 5.5 mm calibers. Such weapons are purchased for recreational shooting, as well as for the purpose of hitting training targets at a distance of up to 100 m or even more. The products can be used at certain temperature conditions - from -10 to +30 degrees.

The rifle is sold already filled. Subsequently, the refueling procedure can be carried out through the fitting using a special station or pump. The weapon is equipped with a pressure gauge, with which you can control the pressure level in the tank. Regulating this indicator allows you to improve the quality of shooting.

Detailed review of the Edgun Matador Standart 6.35 caliber rifle, characteristics and appearance:

The presence of a Weaver rail allows, if desired, to install a collimator, optical or laser variation of the sighting device. The gun barrel is additionally equipped with a moderator to reduce the noise level when shooting. Reloading in this case is carried out by a sliding bolt.

Short

Air rifle Edgan Matador short version

The most compact variation of the rifle. The overall length of the weapon in this case will be equivalent to 680 mm, and the weight of the product will be only two and a half kilograms. The initial firing speed of such a gun is kept at 280 m/s. In this case, compressed air serves as the energy source. It should be noted that, despite its compact dimensions, the rifle is characterized by maximum performance.

The main design feature of the product is the fact that the rifle magazine is shifted slightly to the right relative to the main axis of the barrel. This makes the gun as convenient to use as possible. Among other things, this design allows us to minimize the overall level of weight indicators and the length of the product.

When using the short version of the Edgan Matador air rifle, you need to be aware of the possibility of a delayed shot. As a result, we can talk about the maximum practicality of the gun.

Video review of the short version of the Bullpup rifle Matador, characteristics, operating procedure:

The basic configuration of the rifle includes two magazines of 10 bullets each. The optimal width, as well as the presence of two fixing rubber bands, allow you to use various variations of projectiles for shooting.

The drums used are interchangeable. If necessary, an empty product can be very easily replaced with a new one. Drums can be stored between the top tire and the bottom of the Weaver bar.

Multi-charge model Matador R3M

Repeating model of the air rifle Matador R3M

Using a modified multi-shot version of the Matador R3M rifle can significantly reduce the time it may take to reload. The accuracy of fire of such weapons is much higher.

The dimensions of such a weapon will be identical in comparison with the single-shot version of the rifle. In this case, we can talk about certain design differences. For example, the axis of rotation in this case consists of two balls pressed into the magazine. When installed, they fit into the holes located inside the frame. Such design features allow the bullet replacement procedure to be carried out with one hand. Before preparing to fire, the bolt of the weapon is sent forward.

Attention should be paid to the inappropriateness of firing with the bolt open. This risks causing the sealing rubber to jump out of the breech. Subsequently, in order to replace this element, it may be necessary to dismantle the entire upper block of the rifle.

Review of another popular model among weapon lovers - the Diana air rifle. Characteristics and video reviews of the German rifle, various modifications and prices for them. The most powerful of the Diana line is the 350 Magnum. Before purchasing a Crosman air rifle, we recommend that you read the reviews on this page. Choosing a model - expert advice.

Advantages and disadvantages

Despite certain differences between these models, they also have much in common. Accordingly, the advantages and disadvantages of these brands will be almost identical in many respects.

Various modifications of the Edgan Matador rifle are distinguished by high power levels, extreme accuracy and accuracy of fire, as well as high quality manufacturing and assembly.

Among other things, a significant advantage of the model is the ability to fire a delayed shot.

To do this, you need to cock the bolt, insert a magazine with bullets and turn it counterclockwise. The last procedure is necessary for the most accurate positioning of this element.

The bolt is then pushed forward, after which the rifle is ready to fire. If the shot will not be fired within the next period of time, then the translator switch located on the left side of the frame should be lowered.

The R3M model has certain advantages over other rifle variations. They consist in multi-charging weapons. Thanks to this, you can reduce the time required to reload the rifle.

The main disadvantage of the various variations of the model is the lack of simple sighting devices. For this reason, there is a need to install optics. All this comes with additional financial costs and waste of time.

Technical characteristics of the Edgun Matador rifle

Characteristics of the air rifle EDgan Matador R3M extended bullpup 5.5 mm

Air rifle EDgun Matador R3M 5.5 mm (extended, Bullpup) buy in the Popadiv10 online store. Air rifle EDgun Matador R3M 5.5 mm (extended, Bullpup) at a low price of RUB 79,990. You can pay for your order by mail upon receipt in any part of the Russian Federation. Before placing an order, be sure to check the price and contents of the product by phone (during business hours) or by e-mail and feedback system (at any time convenient for you).

Information on the product “EDgun Matador R3M 5.5 mm air rifle (extended, Bullpup)” is for informational purposes only and is not a public offer, defined by the provisions of Article 437 of the Civil Code of the Russian Federation, characteristics, appearance, color and equipment may be changed by the manufacturer without notice .

Assembling, disassembling the rifle and repair features

Disassembled Edgan Matador rifle

Disassembly and repair work on the Matador rifle should be carried out with the utmost care. Such a need may arise if the weapon needs to be cleaned or if a bullet is stuck in the barrel. In the latter case, it is quite possible to get by with incomplete disassembly of the rifle.

To carry out partial disassembly of the Edgan Matador air rifle, you must first remove the noise moderator casing, and then the device itself. After this, the stem is removed, which is twisted with the reverse side. When these actions have been completed, a shot should be fired, with the help of which the bullet will be removed.

This method of removing a projectile is as safe as possible, since if a cleaning rod is used, the inner surface of the barrel can be damaged.