Traumatic pistol SIG Sauer P226T TK-PRO cal.10x28

Article 226 of the Labor Code is devoted to the financing of measures aimed at improving working conditions and its protection.
It indicates its sources and key parameters. Labor Code of the Russian Federation
dated December 30, 2001 N 197-FZ

Full text of the article, guides, additional information - in ConsultantPlus

Traumatic pistol SIG Sauer P226T TK-PRO cal.10x28

Traumatic pistol SIG Sauer P226T TK-PRO cal.10x28

R226T TK Pro is a self-loading semi-automatic pistol of 10x28 caliber used as a means of self-defense and is popular for honing shooting skills. Externally, the pistol is similar to the Sig Sauer P226 self-loading pistol of 9x19 caliber. Structurally, it has its own characteristics. The operating principle of the automatic traumatic pistol is based on the recoil of the free bolt. The barrel bore has a different geometry that differs from the P226 9 mm Luger model. Locking is carried out by engaging the upper protrusion of the breech of the barrel with the enlarged window of the shutter-casing for ejecting spent cartridges. Trigger trigger for semi-automatic pistol, single/double action SA/DA trigger. The R226T TK is equipped with a bolt stop lever - a barrel lock and a safe trigger release lever located on the left side of the frame. There is no non-automatic safety; safety when handling the pistol is ensured by blocking the firing pin. The shot cannot be fired until the trigger is pressed. The weapon is safe and easy to use. For flawless operation of the automation and improved accuracy, Techkrim designers used an original barrel design with a length of 113 mm. The pistol uses a single-ball cartridge for limited-kill firearms of 10x28 caliber. A rubber bullet is used as a projectile. The P226T is equipped with a double-row magazine for 10 rounds. The frame of the OOOP pistol is made of special light alloy material. The barrel is cold forged. The bolt, levers and other components are made of weapons-grade steel. The materials used increase wear resistance, prevent corrosion, increasing the safety margin of the gun. The P226T TK Pro traumatic pistol is made in black. The wear-resistant Cerakote coating will reliably protect the gun from scratches, abrasion and other external factors. The ergonomic handle fits securely in the hand. The rear sight is mounted on the bolt in a transverse dovetail groove. SIG Sauer Р226Т ТК-PRO is equipped with a Weaver rail for installing additional accessories - laser laser or tactical flashlight. In this configuration, the self-loading pistol is supplied in a sealed protective plastic case. Fasteners are provided for sealing during transportation and storage. The case is waterproof, dustproof and shockproof. You can buy a SIG Sauer P226T TK-PRO traumatic pistol in 10x28 caliber in our gun store in Moscow if you have a purchase license.
64990

Now also official

Traumatic pistol R226TS TK-Pro.

In conditions when government agencies have already maximally limited and complicated the use of firearms by private security structures, traumatic pistols occupy a special place in the arsenal of private security companies. Pistols with increased muzzle energy compared to civilian versions are allowed for use as service pistols, which is at the limit of the non-lethal threshold and should be no more than 150 J (for citizens, traumatic weapons with a power of up to 91 J are allowed).

There are enough examples in criminal reports of repelling attacks on citizens and objects protected by private structures with the help of traumatic weapons, and doctors have already accumulated statistics on injuries from rubber bullets, which more eloquently than emotional condemnations on the Internet indicate the effectiveness, and in some situations, the mortal danger of the weapon in circulation. rubber arrow" with muzzle energy up to 91 J. And it is clear that increasing the shot power by more than 50% for service pistols significantly expands the capabilities of an armed security guard, increasing his chances of success in confronting intruders, while simultaneously solving the issue of unintentionally hitting random targets when using weapons in cramped conditions and urban environments in general. Of course, in this regard, the training of the shooter and his ability to correctly make the decision to open fire are more important, but in emergency situations events sometimes develop quickly and uncontrollably. And the aspect of the relative safety of service weapons for others will always be important. How can one not recall the Russian police, who sometimes serve in large populated areas, literally teeming with people, with Kalashnikovs? Is it really possible to use a machine gun in the city without a direct threat to others?

P226TC TK-Pro is supplied in a sealed plastic shockproof case, the design of which includes ears for sealing during transportation and storage

So the presence of powerful “injuries” in the weapons rooms of private security companies, along with Izh-71 and other firearms, can only be welcomed. Especially considering the fact that in some man-made objects filled with people, a pistol that shoots rubber bullets has no alternative at all in the holster of a well-trained security guard.

In 2016, the range of Russian service traumatic pistols was filled with an extraordinary model - in March, the Izhevsk production plant began production of a new model of service firearms of limited destruction R226TS TK-Pro chambered for a 10x28 caliber cartridge with a rubber bullet. The pistol was developed on the basis of the world-famous Sig Sauer P226 model.

This is already the third development of Techkrim on the P226 platform. A year earlier, the P226 TK Pro sports pistol in 9x19 Para caliber and the P226T TK Pro traumatic pistol in 10x28 caliber were introduced to the market (see the article “Sig Sauer from Izhevsk” in No. 4/2015). The new product is intended for use as a service weapon by enterprises with special statutory tasks and is sold exclusively to legal entities with the appropriate permit. The characteristics of the pistol fully comply with legal requirements.

Along with the pistol, a new cartridge for service traumatic weapons of 10×28 caliber is being introduced to the market, with which the new pistol-cartridge pistol complex provides muzzle energy when fired, not exceeding the 150 J permitted by law. Thanks to the use of a proven basic design, the pistol is reliable in operation and confidently withstands loads when fired with high-power cartridges. The design of the pistol barrel allows for confident aimed shooting at ranges of up to 10 m, which completely covers the tactical range of distances for a security guard’s short-barreled weapon.

The P226TC TK-Pro pistol uses a 10x28 production caliber cartridge, which has increased power compared to the regular civilian version, but not exceeding 150 J

The automation of the service traumatic pistol R226TS TK-Pro works due to the recoil of the free shutter. The firing mechanism is hammer-operated, double-action with safety cocking of the hammer and an original additional safety system - on the left side of the frame there is a safety release lever, when pressed, the sear rises and is disengaged from the cocking of the hammer. Next, under the influence of the mainspring, the trigger rotates until the safety cocking slot engages with the sear, without contact with the firing pin. As a result, with a simple manipulation, the shooter puts the weapon ready to fire into a safe mode with the trigger on the safety cock, leaving it ready for a quick self-cocking shot. Thus, the pistol does not have a special non-automatic safety lock, but additionally, the safety of handling the weapon is ensured by blocking the firing pin, which is not allowed to exit beyond the shutter mirror until the trigger is pressed.

All this significantly increases the safety of handling weapons and allows you to fire the first shot much faster, which is a significant factor for use in security structures.

The bolt stop lever and barrel lock are also located on the left side of the pistol frame. The magazine release is located at the base of the trigger guard and its button can be rearranged for the right or left hand.

For the manufacture of barrels, Tekhkrim uses special wear-resistant stainless steel, which ensures high reliability of the critical part and simplifies the care of the weapon.

The pistol is equipped with two double-row magazines with a capacity of 10 rounds. The pistol frame in the front part has a lug in the form of a picatini rail, which allows you to mount a laser laser or tactical flashlight.

The sights are open, with white contrasting dots. The sight rear sight is mounted on the bolt in a transverse dovetail groove. The pistol's slide is coated with a wear-resistant Ceracoat™ coating.

Details of partial disassembly of the P226TS TK-Pro pistol

It is important that the P226TC TK Pro pistol is supplied in a sealed water- and dust-proof plastic shock-resistant case, which includes ears for sealing during transportation and storage.

We should also pay attention to the ammunition used in the P226TC TK Pro. This is a new production development - a 10x28 caliber cartridge, which has increased power compared to the regular civilian version, but not exceeding 150 J, permitted by law. A special blue marking is applied to the bottom of the service cartridge case, allowing it to be visually identified as a service cartridge.

By the way, Izhevsk promptly prepared for release a universal holster for the P226TC TK Pro pistol. The holster is made of leather and is designed to be attached to a 40 mm wide belt.

Thus, employees of enterprises with special statutory tasks receive into their arsenal a completely new service traumatic pistol with very promising capabilities. Only time will tell to what extent these opportunities will be used by specialists.

Provisions of Art. 226 TK

It is indicated that financing of measures aimed at improving working conditions and its protection is carried out through:

• general federal budget;
• regional budgets;
• local budgets;
• extrabudgetary sources.

The main parameters of financing are prescribed in the relevant laws and regulations.

The possibility of this financing through contributions from organizations and individuals is also allowed. It is emphasized that they are voluntary.

The limits of this funding by employers are indicated below. Their value is no less than 0.2% of the total costs of production of goods/services. Exceptions to this rule apply to unitary enterprises and federal government agencies. A standard list of activities carried out using these funds is established by the relevant government agency involved in the development and implementation of state policy in the field of labor protection, as well as control over this area.

It was emphasized that separate specialized funds for labor protection can be created. They are formed at the level:

• economic sectors;
• regions of the Russian Federation;
• individual territories;
• specific employers.

The principles of their formation are prescribed in the relevant laws and regulations at the federal, regional and local levels.

At the end of the article, it is emphasized that the employee does not bear the cost of measures to improve working conditions and its protection.

The considered article not only establishes the nature of payment for labor protection measures, but also secures the exemption of employees from the need to somehow participate in this financing.

Review of the tactical and technical characteristics of the pistol

The Russian Sauer has the following characteristics:

• Its caliber is 10x28;
• Its length is 196 mm;
• Its barrel length is 112 mm;
• Its height is 140 mm;
• Its thickness is 38 mm;
• Its weight including an unloaded magazine is 802 g;
• Its magazine capacity is 10 charges.

To these characteristics it should be added that the pistol’s accuracy of fire is relatively high - approximately 10 centimeters at 6 m.

Oop pistol p226t tk-pro caliber 10x28

The P226T TK-PRO traumatic pistol of 10x28 caliber is a limited-kill firearm with excellent ergonomics, design and characteristics, produced by the domestic company Techkrim since 2015, both structurally and externally similar to the famous brainchild of the Swiss-German company Sig Sauer P226. The result is a truly world-class model.

The pistol is excellent for sport shooting; thanks to the almost clean barrel and cartridge caliber, high accuracy is ensured; it is also suitable for practicing weapon handling. It is reliable and durable, has a long service life, as manufacturers say - an excess safety margin.

Let's look at the technical characteristics of the R226T TK-PRO.

As described above, the prototype was the successful combat analogue of the Sig Sauer P226, but spare parts were used from Norinco, which, in turn, made it possible to significantly reduce the final cost of the product without reducing its combat qualities.

The barrel and casing are made of stainless steel and are not disassembled. The barrel has one small overlap (see photo) and a slight weakening groove of 1 mm, which makes the thickness of the barrel wall at the groove location 2.5 mm. The frame of the P226T TK-PRO traumatic pistol is made of aluminum alloy.

The casing and frame are coated with a special Ceracoat coating, which makes it virtually indestructible. The trigger mechanism is double-action, with a safety cocking mechanism. Manual safety. The rear sight and front sight are non-adjustable and open with white contrasting dots; they can be replaced. At the bottom of the barrel there is a Weaver rail on which you can install a laser laser or flashlight.

The handle is ergonomic with special notches and can be replaced.

If you pay attention to the reviews about the P226T pistol, you will see a large number of laudatory reviews on the forums. The plant constantly monitors user feedback and tries to take them into account in further improvements.

The pistol comes with a case, a cleaning rod, an awl, a passport and two 10-round magazines. The case makes a particular impression - this miracle of engineering is made of plastic and provides the weapon with all types of IP67 protection: from shocks and falls, from water and dust.